ReyLight
ReyLight Pineapple Mini Seigaiha Titanium Nichia AAA/10440 LED Flashlight *** FREE 10440 BATTERY BUT HAS TO SHIP FEDEX ***
ReyLight Pineapple Mini Seigaiha Titanium Nichia AAA/10440 LED Flashlight *** FREE 10440 BATTERY BUT HAS TO SHIP FEDEX ***
Couldn't load pickup availability
REYLIGHT PINEAPPLE MINI SEIGAIHA TITANIUM (AAA OR 10440 LITHIUM-ION)
SEIGAIGHA SPECIAL PATTERN IS NOW AVAILABLE.
Update 1/8/2024 please see photos these are with the seigaiha pattern in the body tube only not the complete light (head & tailcap). NOT OLD STOCK THESE ARE CURRENT
Free 10440 battery included while supplies last, unfortunately lithium-ion batteries are not allowed to be shipped internationally and will be removed before shipment. Thanks
USA customer's are required to ship FedEx with anything with lithium-ion batteries, if you don't need the battery will ship usps.
GITD/LUMINSCENT IN TRIT SLOT AVAILABLE FOR $15.88 ALL COLORS AVAILABLE BUT LIMITED STOCK MESSAGE ME FOR COLOR
NEW TAILCAPS AVAILABLE HERE >>> Reylight Pineapple Mini Titanium Copper or Brass *** NEW TAIL CAP ONLY – JLHawaii808
NEW TITANIUM WASHERS HERE >>> ReyLight Pineapple Mini Titanium Washer – JLHawaii808
TIMASCUS BUTTON HERE >>> ReyLight Timascus Button For Pineapple/Pineapple Mini – JLHawaii808
NEW! DLC CLIPS! >>> ReyLight Replacement Pocket Clip – JLHawaii808
NEW! NICHIA 519A 4000K (DOMED) EMITTER OPTION!
NICHIA 519A UPGRADE $16.88 ADDITIONAL COST (2700K, 3000K, 3500K, 4500K, 5000K AND 5700K)
OSRAM W1/W2 WHITE UPGRADE $17.88 ADDITIONAL COST
"ADD-ON" EMITTER SWAP OPTION $16.88 ADDITION (SELECT LIGHT AND SELECT THE ADD-ON OPTION) PLEASE MESSAGE OR EMAIL ME FOR COLRO TEMP!
2700K, 3000K, 4500K, 5000K OR 5700K (DOME OR DE-DOME
New tailcaps available here >>> Reylight Pineapple Mini Titanium Copper or Brass *** NEW TAIL CAP ONLY – JLHawaii808
Tritium's are in stock there is a charge $2.00 charge to install a single tritium >>> Tritium Vials 1.5 x 6mm Self-Luminous – JLHawaii808
Please message or call me (808-864-7548) if you want a glow tube OR Tritium installed. If you need battery, please purchase one because I highly recommend it. If you have one if has to be a 10440 (button-top) some button tops will work depending on how short the button (+) is.
Nichia 519a 4000k emitter optioned
Battery not included (highly recommended to purchase a 10440 battery from me or make sure its a FLAT TOP 10440 li-on battery)
Made of solid titanium bar.
Using single AAA battery, max 90 lumens, or 10440 Li-ion battery, max 240 lumens. Flat top, UNPROTECTED 10440 batteries suggested. Some button top could also work, but some brands make the button to long, might cause a problem.
Some models of Ni-MH batteries have high internal resistance causing the low voltage protection to kick in on the light and turn it off. For that reason we recommend 10440 or alkaline.
When you place the order, there is a battery option. Please NOTE, due to shipping policy, battery can be only shipped when it is inserted in the flashlight.
ONLY these countries available. USA, Russia, Canada, Australia, Germany, France, UK, New Zealand, Italy, Spain, Japan, Brazil.
Size: 89mm length (including the switch button) diameter: 15mm
Ti: 32grams
The driver has: Battery reverse protection. High temperature protection. Low voltage protection.
Reverse clicky switch. Full click to turn on or off, half click (tap) to cycle modes.
Thanks Kevin Manley for the more detailed manual.
Reylight Mini Pineapple Programming Guide
1. Turn on the light.
2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats.
a. 1 blink: mode group selection. Press the button to enter this menu.
i. 1 blink: (ML)-2%-20%-100%
ii. 2nd blink: (ML)-10%-40%-100%
iii. 3rd blink: (ML)-2%-10%-50%
iv. 4th blink: (ML)-50%-100%-strobe-SOS
It then repeats. Press the button during any blink to select that mode group.
b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off.
c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on.
d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order.
e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings.
Shorcut: quick double tap to turbo.
There is one tritium slot at the tail switch, 1.5*6mm size.
Share
Collapsible content
DETAILS
Provide details like specifications, materials, or measurements.
Add an image in your Collapsible content settings for more visual interest.
TIPS
Share expert tips on how to use this product or pair it with other items.
SHIPPING
List the details of your shipping policy.
SUBSCRIBE TO OUR EMAILS
Be the first to know about new collections and exclusive offers.