Weltool W3Pro Lep Flashlight 1205 Meters
Weltool W3Pro Lep Flashlight 1205 Meters
Share
WELTOOL W3PRO
Description:
Weltool W3Pro "Featherless Arrow" is an upgraded version of W3 with a luminous flux of up to 505 lumens! The light intensity reaches 363375 Candela, the throwing distance is about 1205 meters! You can use one 21700 rechargeable lithium-ion battery, using high-quality constant current IC, and temperature control to ensure that the flashlight will not be too hot.W3Pro's LEP light source has high energy density, and then passes through a special lens reflection system to form a dazzling light column! High and low modes are simple and practical.
The Weltool W3Pro tactical flashlight has almost no flooding and concentrated light. It is a spotlight, suitable for long-distance throwing, designed for special purposes.
WELTOOL 21700 BATTERY INCLUDED!
PLEASE READ LASER SAFETY INFO BELOW BEFORE PURCHASING
Features: Material: Aluminum alloy, black hard anodized surface Reflective system: Acrylic lens Light source: special LEP module, wavelength 400-700nm, lifespan about 10,000 hours Output: Hight Low LUMENS 505 102 INTENSITY 363375cd 72000cd DISTANCE 1205m 536m RUNTIME 1h58min 4h55min(Tested with Weltool UB21-50 5000mAh 21700 rechargeable lithium-ion battery, outdoor, constant on, below 25 degrees Celsius)Battery: Use one 21700 li-ion rechargeable battery Switch: Tail tactical switch, 50,000 press life High efficiency constant current drive circuit, no noise and no PWM Temperature control protection: when the flashlight temperature is too high, the flashlight will automatically reduce the brightness to prevent overheating Reverse polarity protection Low voltage prompt function Battery over discharge protection Coated tempered glass lens Passed 1 meter drop test Double O-ring waterproof, protection grade up to IP67Each flashlight has a unique serial number Size (±0.5mm): (head diameter) 33mm, (body diameter) 26.5mm, (length) 158mmWeight: 170.5±0.5g (without battery)Included: Waterproof ring, safety cover, stainless steel pocket clip Instructions: First unscrew the flashlight tail cap counterclockwise, the battery positive electrode is inserted toward the head, and tighten the tail cap clockwise. The flashlight has the positive and negative pole reverse connection protection function, even if you install the battery in the wrong direction, the flashlight will not be damaged, but it will not work, please check the battery at this time Half press the tail switch button once, the flashlight starts working (high mode), and the flashlight stops working when the switch is released After half-pressing the flashlight to start working, immediately release it and then half-press the tail switch again, the brightness mode is switched to low brightness, and the operation is repeated in this way, and the mode cycles. Press the switch hard in any mode, there will be a "click" sound, lock the current brightness is always bright; press again, the switch will have a "click" sound, the flashlight is turned off. When the battery power is low, the flashlight light flashes, even if you focus on your work, you will also see the light prompt. Please replace the battery in time Notes: Unauthorized disassembly may damage the light and void the warranty The light will increase in surface heat during use, recommended use is outdoors in a well ventilated area with ambient temperature under 25 degrees Celsius and the wind speed exceeds 5m/s. When the light is uncomfortable to hold due to increased heat, please turn the light off until it cools down. If used indoors, it is recommended to be used for no more than 10 minutes each time and allow the light to cool down between uses. Please swap out the O-rings regularly to maintain the water resistance level Lubricate the threads with professional grade lubricant regularly Maintain and keep clean any contact surfaces of the flashlight with alcohol swab. This may prevent irregular flashes during use. Remove batteries during storage. Keep lithium-ion batteries charged approximately every 4 months This flashlight may not be used as a diving light Do not aim this light directly at eyes or exposed skin to prevent injuries Keep this flashlight out of the reach of children. WARNING: This light uses a high efficiency LEP emitter, with power output between 0.22 – 0.25W, classified as a Type IIIb laser device. Please use in accordance with applicable laws and regulations. By using this device, you certify you have read the included “Laser Safety” warnings and release the manufacturer and retailers from all liabilities. The tail cap acts as a “safety key” and must be kept safe. The tail cap switch can shut off the light immediately or by twisting off the tail cap as a safety back-up. An opaque lens protector is included as a standard accessory. Equipped properly, this protector will prevent any light from escaping the front of the flashlight as a safety device.DO NOT aim at another person. DO NOT aim at mirrors, glasses or other reflective surfaces. DO NOT aim at aircraft or vehicles in operation. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm.
Collapsible content
DETAILS
Provide details like specifications, materials, or measurements.
Add an image in your Collapsible content settings for more visual interest.
TIPS
Share expert tips on how to use this product or pair it with other items.
SHIPPING
List the details of your shipping policy.
SUBSCRIBE TO OUR EMAILS
Be the first to know about new collections and exclusive offers.