19mm MTM triple MCPCB with Cree XQ-E LED secondaries
$50-55 COST ON DRIVER AND MCPCP DIRECTLY FROM CWF
NOTE: THESE ARE BUILT-TO-ORDER WILL SHIP ACCORDINGLY!
BUTTON TOP UNPROTECTED 15A CELL RECCOMENDED, SOME FLAT TOPS WILL WORK
Secondaries colors:
RED
GREEN
AMBER
Configuration Options:
To enter configuration mode, quickly turn off the light 15+ times until it starts to flash. Once it starts to flash, you are in configuration mode. Once in configuration mode, the light will give a solid flash between 1 and 5 times. The number of solid flashes indicates the option number to be changed. To select/change the option turn the light off and back on during the strobing flashes that immediately follow the solid flashes. When you choose option 1 it will start to flash 1-8 times, turn off and back on after the number of the group you want comes up. When setting the temperature control the light will go from programming to turbo, turn the light off when it reaches the temperature you desire.
1. Mode Group Select. 2. Memory Toggle. 3. Mode Order Toggle. 4. Temperature Calibration Mode. 5. Reversing Toggle.
If you need help with programming the driver contact Charles Wiggins because I am not familiar with his driver >>> https://www.gpknives.com/contact/
