Optional SFT40 offers slightly higher lumens and a high candela rating, approximate 2200 lumens with 500+ meter throw, Additional $20 added to the cost for cost of emitter and the labor to swap the emitter.
6 X GLOW TUBES ALREADY INSTALLED
RGB lighted tail switch
18350 batteries not included
ANSI/ NEMA FL1
LOW
MED
HIGH
TURBO
STROBE
OUTPUT
Mode1
25LM
150LM
310LM
1050LM
310LM
Mode2
50LM
410LM
1050LM
2000LM
1050LM
RUNTIME
Mode1
16h
3h 45min
1h 55min
5min+1h 30min
/
Mode2
32h
4h
10min+3h 15min
2.5min+3h
/
INTENSITY (Max)
24000cd (Mode1)/ 40000cd (Mode2)
DISTANCE (Max)
310m (Mode1)/ 400m (Mode2)
IMPACT RESISTANCE
1m
WATERPROOF
IPX-8, 2m
SIZE
96*32*25.5mm (Length*headØ*tubeØ)
N.W.
106g (Aluminum)
Light Source
1 X Luminus SST40
POWER
19.5W (Max)
BATTERY
1 X 18350 or 18650 Via the extension tube (excluded)
SWITCH
Rear switch with RGB back-lit light
Notice: The above Mode1 appropriate parameters are lab-tested by using a 18350 Li-ion battery, and Mode 2 is using a 18650 Li-ion. It may vary due to the difference in environments and batteries. The runtime on High and turbo are accumulated due to the over-heat protection setting.
Operation Instruction
ON/ OFF: Fully press the switch Output change: Half-press the switch from ON (with memory). Strobe: From ON, continuously tap the switch 6 times Mode 1/2 shifting: From ON, continuously tap the switch over 10 times
