Lumintop FW3A Titanium + Copper 2800 Lumens EDC Flashlight

LUMINTOP FW3A TI + CU (TITANIUM + COPPER)

UPDATE: NICHIA 219B SW35K OR SW45K OPTION AVAILABLE FOR $25 ADDITIONAL, THESE ARE MADE TO ORDER CAN TAKE UP TO AN EXTRA DAY SHIP TIME

NICHIA 519A AVAILABLE

DE-DOME EMITTER OPTION AVAIALBLE, DE-DOMING AN EMITTER LOWERS THE CT (COLOR TEMP) BUT ADD MORE THROW AND DOESN'T AFFECT THE CRI OR LUMENS

SPECIFICATIONS:

Emitter:   Three LEDs on a copper DTP MCPCB e.g.
                 Cree XP-L HI CW, NW LED, Nichia 219CT, or Luminus SST20 LED
Optic:       Standard TIR Optics
Flux:        ~2800 lm (XP-L Hi)
Intensity: ~12 500 cd ANSI throw ~200 m (XP-L Hi)
Firmware: The FW3A uses free software called Andúril,
                  distributed under the terms of the GPL v3. Code is available from
                  http://tiny.cc/TKAnduril
User interfaces: [[1] By default the FW3A is set to use SMOOTH RAMPING.
                  Instant access to TURBO mode is also provided.
                  [2] A more conventional STEPPED RAMPING UI is available if you like discrete modes level. You can choose how many steps you want.
                  [3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets. To exit this mode, physically disconnect power
                  [4] MUGGLE mode uses a reduced output.
                 [5] It has an electronic LOCKOUT for safety but acts also as momentary low light. Other
                  functions: Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher,
                   candlelight, lightning storm
Battery:  One flat-top or button-top 18650 cell. An unprotected cell is recommended. Max. length
                  66mm. Cell is not included.
Driver:    FET+7+1 driver. Low parasitic drain while OFF
Body:     Titanium & Copper
Switch:   Electronic tail switch
Ingress rating: Equivalent to IPX8
Weight:  Approximately 89 g without cells
Size:      25.5 mm Ø head x 92.5 mm length.