LUMINTOP FW3A TI + CU (TITANIUM + COPPER)
NEW! Nichia 519A Emitters
Approximate 1800-2000 Lumens!
2700k
3500k
4500k
5000k
SPECIFICATIONS:
Emitter: Three LEDs on a copper DTP MCPCB e.g.
Cree XP-L HI CW, NW LED, Nichia 219CT, or Luminus SST20 LED
Optic: Standard TIR Optics
Flux: ~2800 lm (XP-L Hi)
Intensity: ~12 500 cd ANSI throw ~200 m (XP-L Hi)
Firmware: The FW3A uses free software called Andúril,
distributed under the terms of the GPL v3. Code is available from
http://tiny.cc/TKAnduril
User interfaces: [[1] By default the FW3A is set to use SMOOTH RAMPING.
Instant access to TURBO mode is also provided.
[2] A more conventional STEPPED RAMPING UI is available if you like discrete modes level. You can choose how many steps you want.
[3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets. To exit this mode, physically disconnect power
[4] MUGGLE mode uses a reduced output.
[5] It has an electronic LOCKOUT for safety but acts also as momentary low light. Other
functions: Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher,
candlelight, lightning storm
Battery: One flat-top or button-top 18650 cell. An unprotected cell is recommended. Max. length
66mm. Cell is not included.
Driver: FET+7+1 driver. Low parasitic drain while OFF
Body: Titanium & Copper
Switch: Electronic tail switch
Ingress rating: Equivalent to IPX8
Weight: Approximately 89 g without cells
Size: 25.5 mm Ø head x 92.5 mm length.